Filter package for PS Vita, touch screen filter type pad and back completely, put the camera outside further filter was set. That is also provided with a simple cleaning cloth. Product here is there is a glare and anti-glare type type, except for surface treatment is made to make the same for both.
First glare type. Screen Protector Glare type is the height of the transparency point, has become a (better acceleration and low cloudiness that) 96% transmittance, a haze value of 0.5%. Some features have been subjected to processing antifouling antireflective layer, both of dirt that reduce the reflection of light and fingerprints.
Viewed and paste it into a fact. But first the front filter, so that the vertical from anywhere the film has adopted the "free-cut peeling film" in this filter, that is attached to the surface adhesion. So while it will peel off the film paste to the left and right there, paste it to turn off the middle of the first filter, and then fixed.
Align placed on the body, only the middle of the screen you want to paste the cut the first film in the center from there. After we put next to the peel while two films left and right. In this device is well done, was able to put full type of filter is difficult to clean with paste. There is a place if you should be aware of a little so as not according to the filter so diluted in the paste to the entire, well, bubbles can also be difficult to draw with to the screen.
Following is a filter for the back touch pad. Peeling of the film here is usually furnished so, go put on from either the left or right. Even for thin and soft than those on the front of the filter is fairly easy to enter the bubble. Going put on while holding down one finger and slowly a few the point. The final filter for the camera outside. Because this is a small filter less than 1cm, then put on top of the lens to slip and not be particularly difficult, but if completion.
Appearance after pasting, so that the front is thin and high transparency filter first, that the put a filter inconspicuous. I make a good show in the filter with strong luster. Fingers do not catch much of the opening edge portion of the speaker. Sometimes the filter is enhanced gloss, eye-catching about the same level fingerprint state and has not put anything. In addition, there is something just a little bluish color reflected by the anti-reflection layer.
Sensation of touch really are quality vinyl, slip a little stronger. But an unusual feature, but it would remain in ruins just wipe and wipe the vertical spread of sebum dirt finger marks, which are characterized by easy to clean and wipe the side also
Following is the screen protector anti-glare type. Here is to make the same basic filter for the camera for the touch pad back and back, so the same thing, I summarize the differences between the look and feel of touch of the front filter.
But paste first, so that the film peeling off from anywhere in the vertical as well as glare type too. Cut and paste around the center, we put the left and right from there. Easy to stick to moderate and there is thickness-glare filter is more of this type.
After the appearance of the paste, gloss will disappear in the overall filter that put a semi-transparent white, the original and vary considerably. Screen also becomes soft impression, but it will also gently light, If you look closely, there was a visible place for anti-glare treatment or a little shimmer.
Feel an equivalent to the texture sleek screen filter texture is smooth is not far when compared to for PlayStation Vita Protective Film by HORI, do not put anything but rather, what anti-glare treatment is product by HORI. There is a difference. However, after fingerprint is almost neutral, remain about just a little finger mark has passed. I do not care about without having wiped
